In 2011, more than $50 billion was lost to damages from 99 federally declared natural disasters in the United States ranging from hurricanes, tornadoes, earthquakes, floods, fire, and similar events (Pidot, 2013 Ruckversicherungs-Gesellschaft, 2011. This cost was deeply felt within the residential sector, as many homes succumbed to contaminated floodwater, were deemed structurally unsound as a result of the shifting ground below, or were demolished by winds in excess of 200 miles per hour. Hundreds of lives are lost every year to such terrible events; thousands more are affected by the financial, emotional, and societal distress that follows. The failure to evacuate, ill-equipped and unprepared communities, the choice to live in a dangerous location, and inadequate or ineffectual building codes and mitigation techniques that cannot stand up to the hazards of the area, are just a few reasons for the rising disaster price tag in the United States (Pidot). With over 90 million homes in the country, a substantial percentage of the cost of disaster recovery could be alleviated by simply educating homeowners and builders on disaster resistant construction techniques and products designed for their area. This project is the study of techniques and products readily available for two hazard-prone areas: Houston, Texas, and Anchorage, Alaska. Houston and Anchorage were chosen because of their affinity for severe natural events and the vast differences in climate, population, and location.

There are three aspects to a disaster: severity of the event, resiliency of the communities affected, and population (Hyndman & Hyndman, 2011). The severity of the event reflects the strength of the natural forces at play. An earthquake above 7.0 on the Richter scale, and a category 5 hurricane, are examples of severe hazards. While such high-level hazards are rare, natural disasters are not. Resiliency is the ability of a community or communities to recover from a natural event. The inability to protect and evacuate citizens, the destruction of structures because of inadequate building codes, and a lack of post-disaster recovery plans are factors that can contribute to a slow return to normalcy after a disaster. Such factors are common in less developed countries, as they lack the financial and governmental stability to create and activate a disaster plan properly (Stromberg, 2007). The population affected determines the true meaning of a disaster. The extremity of a disaster is the balance between the numbers of people affected and the amount of damage, so a lesser event in a highly populated area can be the same level of disaster as a major event in a less populated area. An earthquake in Los Angeles would be called a natural disaster; it would be a severe event affecting thousands of people and buildings, and it would take considerable time to rebuild and return the city to normalcy. The movement of the earth itself is a natural hazard; the event, including the people affected or killed, the cost of damages, and the recovery process is the natural disaster (Hyndman, & Hyndman, 2011 Kusar, 2008.

Given this terminology, we might ask: “What if we manipulate the three aspects?” We could lessen the severity of flooding by not damming or leveeing rivers. We could try to redirect population growth to cities away from the Gulf Coast, which is consistently battered by hurricanes. Finally, for the easiest avenue of change, we could build homes and businesses to better withstand the forces of nature and drastically reduce rebuilding costs, the number of lives lost, and recovery time. While modern codes account for the natural hazards, they can still fail in extreme situations. Lack of education about alternative protection techniques is common among consumers and builders in some of the most dangerous areas in the United States. The result of this study is a list of improvement options to strengthen homes for citizens in both areas of study. The home seen in Figure 1 is the basis for all additions that will follow and should be able to withstand the hazards both of Anchorage and Houston. There are hundreds of economically efficient and rather simple ways to prepare a home for danger, but lack of education and the “it will never happen to me” mentality hinder consumers from making vital decisions about buying, building, and remodeling a home.


Anchorage, Alaska

Anchorage is one of the largest cities in Alaska, with approximately 298,000 people, 1,704 square miles, and a major port; it holds the record for some of the most severe natural hazards and weather systems in the United States (US Census Bureau, 2013). According to the Alaska Seismic Hazards Safety Commission, the state is the most geologically active location in the entire country because of its location squarely on the infamous convergent plate boundary between the Pacific and North American Plates (Department of Natural Resources 2010). In 1964, Anchorage, Alaska experienced the second largest earthquake on record followed by a deadly 43 meter high tsunami, causing more than $311 million in damages and claiming 128 lives (Stover and Coffmen, 2012). Another consequence of the plate boundary are the Aleutian Islands, just off the coast of Anchorage, which are littered with more than a dozen active volcanoes. While geologic hazards are a major concern in Anchorage, other natural hazards are common as well. The following is a complete list of the dangers of the area that will be accommodated in the design of the disaster resistant home:

Houston, Texas

Houston, Texas, consistently tops many charts of cities “most at risk for natural disaster.” The Insurance Institute for Business and Home Security (2012) lists this precariously placed city in the top eight at-risk cities, alongside other known disaster locations such as New Orleans, Miami, and Los Angeles. A distinction between Houston and Anchorage is the distinct difference in population, which is why the term disaster comes into play in Houston more so than in Alaska. Houston occupies approximately 600 square miles with 2,160,821 (US Census Bureau, 2013). This massive number of people and businesses are located on a landmine of expansive clay with creeping fault lines. The city is also punished year after year by hurricanes originating in the Gulf of Mexico. In 1900, Galveston, Texas, just outside Houston, was flattened by the worst natural disaster in United States history, an unnamed hurricane that claimed the lives of more than 6,000 people (NOAA, 2004). While technology and protection agents to prepare the city for natural hazards have improved since then, the population of Houston continues to grow, and there is only so much humans can do against the power of nature. The following is a complete list of natural hazards which Houston, Texas, faces throughout the year:


Before a house is built, it is important to consider the building site with precaution and determine if the location, as well as the ground itself, are suitable for building. There are some natural hazards that are simply impossible for a house to recover from, but they can be avoided by choosing a safe and stable location. Hiring a professional to inspect the land for hazards and explain the ramifications of a building on the land is recommended for all areas, whether prone to by natural disasters or not (Dehring, C., 2006). These are examples of hazards avoided during the project’s hypothetical land selection:

When it comes to preparing for natural disasters, people must make important decisions. Not all locations will have the same level of danger from every hazard, and not all hazards are worth preparing against. Ultimately, the forces of nature are unpredictable, unrelenting, and deadly. Hazards such as tsunamis, volcanoes, and sinkholes are examples of events that can only truly be prepared for in the initial site planning. It should also be noted that the features explained below are suggestions to give a home a better chance, but there are forces that cannot be economically combated at the present time.


The foundation is the base of a house. If the foundation fails, the house is less likely to survive the duration of the event. Foundation repairs are also extraordinarily expensive. Because of this, the foundation is a vital part of preparing the home for natural hazards as well as keeping the house standing for as long as possible. As shown in Figure 2, a post-tension slab, a type of on-grade concrete and steel foundation, has been found to sustain less damage from ground movement (Reichel, 2013). This type of foundation is suggested for both Houston and Anchorage due to the unique soil movements in those locations.

In Houston, most of the soil is made up of expansive clay that can shrink and swell with water intake as well as have issues with water subsidence (Hyndman & Hyndman, 2011). This causes problems as the clay below a home expands at different rates; the slab can be pushed and pulled in different directions, causing cracks in brickwork and the foundation. A post-tension slab is an on-grade concrete slab with steel cords that are pulled partially through the slab during the cement curing process to increase the tensile strength of the concrete. This process reinforces the concrete foundation to protect against soil movements such as shrinking, swelling, and earthquakes (Rogers, 2008).

Anchorage has a similar but different story. The soil movement in Alaska is affected by earthquakes and the freeze-thaw cycle of permafrost. Whereas Houston deals with the vertical movement of shrinking and swelling clay, Anchorage has the same vertical movement of permafrost in addition to the more violent sudden horizontal and vertical movement caused by earthquakes (Hyndman & Hyndman, 2011). The post-tension slab combats this while the additional strength added to the concrete prevents it from shaking. Another alternative foundation suggested for these areas, both of which are prone to flooding, is a raised slab to lift the home above the base flood elevation. However, post-tension slabs are a more effective measure to protect the foundation.



The framing of a structure is similar to the skeleton of the human body. It is the second step in building a home and provides the basic setting for the rest of the home. Most of the strength of the house will depend upon the framing and the techniques used at this stage in the building process. For Anchorage, structural insulated panels (SIPs) are suggested to best combat the movement of earthquakes. SIPs are precut wall sections made of two sheets of oriented strand board (OSB) with Styrofoam insulation in the middle (Structural Insulated Panel Association, 2013). This form of framing is rising in popularity, as it is easy to install, a good insulator, and resists swaying better than traditional framing alternatives (Reichel, 2013). If traditional framing is used, horizontal bracing should be installed for a similar effect.

Although SIPs are also used in Houston, it is suggested to simply build with treated advanced framing and closed cell spray foam insulation. Advanced framing is a newer type of framing that uses 2”x6” studs, 24” on center, as opposed to the traditional use of 2”x4” studs, 16” on center (Krigger & Dorsi, 2004). This seemingly small change allows for thicker walls, creates more room for uninterrupted insulation and a larger buffer from the outside, and uses less wood. However, while most of these benefits are similar to those of SIPs, the important difference is the type of insulation. Closed cell spray foam is suggested for Houston because it also serves as a vapor barrier, which keeps water from reaching the wood studs and causing mold. A wet-flood proofing method minimizes damage regardless of the water inside the home. This makes for easy recovery after the flood waters recede, as the water will sit against the vapor barrier and not damage the home framing. With this method, all that would need to be replaced after floods is the drywall covering (see below). Closed cell spray foam insulation is also resistant to bugs and protects studs from termites that can severely damage homes in sub-tropical climates (Reichel, 2013).


Connectors are long metal straps screwed onto vital joints throughout the house in order to secure each piece of the wall together. The straps protect against swaying of the house and external pressures such as wind, water, and ground movement. In both Anchorage and Houston these straps, which secure the house to itself and to the ground (Figure 3) are suggested for two very different reasons (Federal Emergency Management Agency, 2011). Hurricanes, storms, and tornadoes in Houston and other parts of southeastern Texas make use of specific connectors called hurricane straps that brace the roof of a house to the frame. During high wind situations, the home is exposed to extreme pressures from outside that push at the exterior walls, testing the doors and windows as the pressure attempts to move inward. If at any point this seal between the exterior and interior is broken, the wind pressure enters the home, becomes trapped, and is forced upward. If the roof has any weaknesses, the uplift from the wind will cause the roof to blow off the house. Once the roof is gone, there is nothing left to hold the structure together as the storm continues and it will inevitably rip apart, leaving nothing but the foundation (Hyndman & Hyndman, 2011). The additional fastening of hurricane straps prevents the roof from flying off in high winds once the seal of the house is broken and can save a house from destruction.

Anchorage has a much different story for its connectors. Although the city has high winds, earthquakes are a larger problem. During earthquakes very different forces are exerted as homes must resist horizontal and vertical movements as opposed to inward pressures. These forces can be combated at the foundational level with proper bolting of the home to its foundation; otherwise, the structure will in essence bounce off the foundation and crash into the ground. Proper bolting is also useful in flood zones to keep the house from floating. The wall connectors are important to resist the swaying of the house during the horizontal motion of seismic waves. Simple nails, common in framing, can easily pull out and crack walls because of their angle of motion. The use of screws and connectors can keep walls structurally sound and prevent them from falling in on the residents (Hyndman & Hyndman, 2011).


Drywall is a necessary home-building material with few alternatives. However, it is important to understand the best types of drywall to use if flooding is an issue. Part of the cost in flood recovery is replacing wet and molding drywall, but there are ways to reduce the amount of drywall that needs replacing. There are three types of drywall that can be useful in both Anchorage and Houston flood zones. The first is regular drywall; it is white and made of gypsum and paper. This type has the sole purpose of finishing the walls with a smooth surface. However, this type is very susceptible to water, stains, and damage. Mold-resistant drywall is the second type; it is commonly used in kitchens, baths, and laundry areas as they are most likely to have water in the air, walls, and floors. Mold-resistant drywall is, as its name suggests, less likely to grow mold given minor spills, floors, and water vapor in the air (Krigger & Dorsi, 2004). However, when this type is inadequate, paperless drywall is an option. This type has no exterior paper to soak up water and will better withstand flooding. Although the walls are not as smooth as traditional drywall, paperless drywall can save money by avoiding drywall replacement after a flood and can be painted and used in the same way (Reichel, 2013).

Different types of drywall installation can also be considered in flood preparedness. When installing drywall in a home that has a potential to flood, it is possible to install it an inch or so above the finished floor in the space that will later be hidden by the baseboard. Doing this will allow a minor flood or spill to wash over the floor and not damage the drywall, which soaks up water and can mold if not addressed immediately. In anticipation of large floods, one can install drywall horizontally and leave a gap between the bottom drywall sheet and the top drywall sheet so that only the bottom sheet might require replacement. A chair rail or other wall decorative accent can cover the gap and save a homeowner half of the cost of drywall replacement (Reichel, 2013).


Windows and Doors

Openings in the home are the most vulnerable points during heavy storms. Because of these hazards in both Anchorage and Houston, there are a number of suggestions for placement, type and size of windows. It is important to retain the seal of the house, as it can prevent further damage and keep the home completely intact. All windows and doors should be impact resistant to best combat debris that can break the seal of the house and injure residents inside (Gurley & Masters, 2011). Impact resistant windows are made from two sheets of glass, sandwiching a sheet of thick plastic (Figure 4). This reduces the likelihood of shattering and, with additional strength in its frame, retains the seal undamaged. Further protection of window coverings or storm shutters could be needed in Houston, where the wind is exceptionally severe (Hyndman & Hyndman, 2011). Another recommendation to avoid broken glass and damaged windows is to have smaller windows, i.e., openings less than six feet high or wide. The small surface area is more difficult to hit and withstands attack better than oversized windows. Windows should also be sparse on the south and east sides of the home, as these sides are affected most by clockwise moving weather systems (Reichel, 2013)

Figure 2 Post tension slabs sustain less damage from ground movement.

Figure 2
Post tension slabs sustain less damage from ground movement.


The garage is the largest opening in the house and as such proves a vital point to protect during a hazard. During wind hazards it is common for garage doors, which have little bracing built in, to be blown inward, breaking the seal of the house. After the integrity of the door is broken, the small remaining wall area rarely can hold up the weight of the roof, resulting in the roof’s collapse (Gurley & Masters, 2011 Hyndman & Hyndman, 2011. During earthquakes it is also typical for the garage to crumble and allow the roof to collapse. To combat this, impact resistant garage doors can be used as an alternative to traditional doors or hurricane bracing can be installed onto the current garage doors. Additional framing on the walls to support the roof after the door is gone can increase the strength of the structure and keep the garage and attached house intact (Reichel, 2013).



Roofing materials have a large role in preparing for natural hazards. In Houston, the type of roofing is very important for a number of reasons. During hurricanes and tornadoes, high winds can rip up shingles, transforming nails and asphalt into projectiles (Gurley & Masters, 2011 Hyndman & Hyndman, 2011. In times of extreme heat, a light colored roofing material serves as better reflector of the sun’s rays, keeping the interior of the home cooler (Krigger & Dorsi, 2004 ). In addition, Houston is known for its hail, which can severely damage weaker roofing and puncture the roof, requiring costly repairs and patchwork. However, all of these issues are solvable with proper installation and knowledge of products. Stone, terracotta, and metal stand up well against the impact of debris and hail; however, such options are very stylized and expensive. The best alternative for an average home is proper nailing of impact resistant shingles that are made of a harder material and can withstand continual battering of the roof (Insurance Institute for Business and Home Security, 2012.

Anchorage does not have hail or much debris due to high wind; however, snow load and occasional ash load from the nearby volcanoes can be issues. Therefore, a lightweight material is suggested because it will not place as much stress on the roof (Federal Emergency Management Agency, 2011). Darker materials also absorb heat in the colder winter months to help keep the house warm and use less energy. In both locations, a hip roof is suggested, as it is the most aerodynamic roof shape (Krigger & Dorsi, 2004).


Siding varies greatly in Houston and in Anchorage because of the soil movement. In Houston, where the greatest threat is wind and water, masonry is suggested because of its strength and stability (Reichel, 2013). If built on proper foundations, brick or stone veneer will withstand the minimal movements of expansive soils and hold better against flying debris and wind during storms. In Anchorage masonry and stone are advised against because of earthquakes. Such violent movements crack and weaken masonry and make it more likely to fall, which can be deadly to any resident or bystander (Hyndman & Hyndman, 2011 Kusar, 2008. The lighter weight, more flexible vinyl siding is recommended since it is less likely to break or create dangerous falling objects (Insurance Institute for Business and Home Security, 2012).


Falling chimneys are common in hurricanes, other strong storms, and earthquakes because they are made of masonry, are heavy, and often are poorly attached to the house. To solve these issues additional bracings can be bought and installed cheaply and easily. During initial construction, chimneys can also be reinforced with steel and designed to be short and wide, as opposed to tall and narrow, which will reduce swaying and pulling on the house (Federal Emergency Management Agency, 2011).


If flooding is a possibility, waterproof flooring such as sealed laminate, stone, or waterproofed wood is suggested. These choices will survive most influxes of water, whether moving or stagnant, clean or contaminated, and will greatly lessen cleanup cost and time. If soft flooring is still desired, rugs or other removable coverings are suggested because they are cheaper to replace and do not require invasive removal when damaged (Reichel, 2013).



Faulty or damaged wiring can result from a natural disaster and can be very costly to correct. The following is a list of suggestions for proper electrical practices all homeowners should know in hazard prone areas:


Plumbing issues after natural hazards are common, particularly after floods or freezes. These problems can be costly and damaging to the rest of the home, prolonging or causing home calamities. Following is a list of suggestions for plumbing fixtures and materials to best avoid the natural problems of the area:


The safe room is in the center of the house. The room may look and function like a laundry area, mud room, or closet, but there is much more underneath. The safe room is built with reinforced walls and all the supplies needed to survive a natural disaster, even if the rest of the house is not accessible. It also serves as an emergency center for the family, as it contains all items and controls needed during any disaster. For this project two different safe rooms are described, applicable to both Anchorage and Houston hazards. The difference is the price: the more amenities and the stronger the construction, the more expensive the room will be. This additional cost has to be taken into account by the consumer and balanced with the benefits and peace of mind that comes with this exceptional tool to protect a family (Federal Emergency Management Agency, 2013).

Good Safe Room

Strong Safe Room

Amenities and Features


Natural hazards occur every day, but whether the hazards cause a disaster is up to us. Earthquakes and hurricanes rarely kill people; it is the buildings falling on their occupants that results in death.It is important to remember that nature is not out to attack us as a species, but our progress is getting in the way of nature. In order to live peacefully we must accommodate, and one way to do so is to promote better building practices that can withstand the forces of nature. Simple steps such as educating contractors and consumers about alternative products and building techniques to build a safer home can save money, time, and lives of families in dangerous areas. As natural hazards increase every year, these substitutes become less of an option and more of a necessity to protect the household (Stromberg, 2007). People in Florida, Los Angeles, and New York City spend thousands of dollars on repairs, replacements, or rebuilding every few years because of extreme weather and natural earth movements, but this can be avoided with additions that contribute minimally to the total cost of the home. As a result, residents could live in a safe home without worrying about natural disasters in the area destroying their investments.


Dehring, C. (2006). Building codes and land values in high hazard areas. Land Economics , 82(4), 513-528. Retrieved from

Department of Natural Resources. (2010). Earthquake risk in Alaska. Retrieved from

Federal Emergency Management Agency. (2011) Homebuilders’ guide to earthquake resistant design and construction, FEMA 232. FEMA, Washington, D.C.

Federal Emergency Management Agency. (2013, June 05).Safe rooms. Retrieved from

Federal Emergency Management Agency. (2013, March 21). Build a kit. Retrieved from

Gurley, K. and Masters, F. (2011). Post-2004 hurricane field survey of residential building performance. Natural Hazards Review. 12, SPECIAL ISSUE: Hurricanes and Insurance, 177–183.

Hyndman, D., & Hyndman, D. (2011). Natural hazards and disasters. (3rd ed.). Belmont, California: Brookes-Cole, Cengage Learning.

Insurance Institute for Business and Home Security. (2012).Disaster safety. Retrieved from

Keçeba?, A. (2013), Variation of insulation thickness and exergetic cost saving with outdoor temperature in pipe insulation. Environmental Prog. Sustainable Energy, 32: 784–789. doi: 10.1002/ep.11687

Krigger, J., & Dorsi, C. (2004). Residential energy: Cost saving and comfort for existing buildings. (4th ed.). Saturn Resource Management Inc.

Kušar, D. (2008). The impact of natural disasters on buildings' architectural styles. Geografski Zbornik / Acta Geographica Slovenica,48(1), 93-120. doi:10.3986.AGS48104

NOAA. (2004, February 04). Galveston storm of 1900. Retrieved from

Pidot, J. (2013). Deconstructing disaster. Brigham Young University Law Review, 2013(2), 213-257. Retrieved from

Reichel, C. (2013, January 20). Interview by C Davis. Building homes for natural hazard prone areas.

Rogers, J. (2008, November 25). Post-tensioned slabs. Retrieved from

Ruckversicherungs-Gesellschaft, M. National Oceanic and Atmospheric Administration, (2011). 2011: A year of extremes. Retrieved from Weather-Ready Nation website:

Stover, C., & Coffman, J. (2012). Historic earthquakes, Prince William Sound, Alaska 1964. Retrieved from

Strömberg, D. (2007). Natural disasters, economic development, and humanitarian aid. The Journal of Economic Perspectives,21(3), 5-222. doi: 10.1257/jep.21.3.199

Structural Insulated Panel Association. (2013). What are sips?. Retrieved from

US Census Bureau. (2013, June 27). State and country quickfacts Retrieved from

Photograph of Cara Davis


Cara Davis is an alumna from Covington, Louisiana. She wrote this paper while pursuing her B.A. in Apparel, Housing, and Resource Management. After graduating, Cara found a career with Green Home Solutions, a green building and remodeling company in Seattle, Washington.

She would like to thank Dr.Kathleen Parrott for her help and support throughout this project.